linux下用wvdial实现gprs拨号上网
时间:2023-07-13 05:05:24 点击:272

  1. 安装wvdial

  sudo apt-get install wvdial

  2. 在/etc/wvdial.conf中写入wvdial的配置信息: femacs /etc/wvdial.conf

  Init1 = ATZ

  Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

  Init3 = AT+CGDCONT=1,“IP“,“CMNET“ ##important! 否则无法使用DNS

  Modem Type = Analog Modem

  Baud = 115200 ##根据你的gprs modem来设定

  New PPPD = yes

  Modem = /dev/ttyS0 ##你所连接的串口

  ISDN = 0

  Phone = *99***1# ##中国移动的拨号号码

  Password = *** ##其实没什么用

  Username = itlanger

  这一步,可以首先运行wvdial,这时会出现找不到modem,然后修改/etc/wvdial.conf, 增加

  Baud = 115200 ##根据你的gprs modem来设定

  Modem = /dev/ttyS0 ##你所连接的串口

  然后再次运行wvdial, 再手动加入一下内容到/etc/wvdial.conf:

  Init3 = AT+CGDCONT=1,“IP“,“CMNET“

  Phone = *99***1# ##中国移动的拨号号码

  Password = *** ##其实没什么用

  Username = itlanger

  这里Init3 = AT+CGDCONT=1,“IP“,“CMNET“ 一定要加,否则wvdial拨号时会出现:

  warning, can't find address for `www.suse.de`

  --> warning, address lookup does not work

  --> Nameserver (DNS) failure, the connection may not work.

  导致只能ping通IP,不能ping通域名

  3. 配置ppp参数: femacs /etc/ppp/options

  noipdefault

  ipcp-accept-local

  ipcp-accept-remote

  defaultroute

  noauth

  crtscts

  debug

#p#副标题#e#

  4.拨号上网: sudo wvdial

  --> WvDial: Internet dialer version 1.60

  --> Initializing modem.

  --> Sending: ATZ

  ATZ

  OK

  --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

  ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

  OK

  --> Sending: AT+CGDCONT=1,“IP“,“CMNET“

  AT+CGDCONT=1,“IP“,“CMNET“

  OK

  --> Modem initialized.

  --> Sending: ATDT*99***1#

  --> Waiting for carrier.

  ATDT*99***1#

  CONNECT

  ~[7f]}#@!}!}#} }9}“}&} }*} } }'}“}(}“}%}&K_{}$}#}%B#}%

  --> Carrier detected. Waiting for prompt.

  ~[7f]}#@!}!}#} }9}“}&} }*} } }'}“}(}“}%}&K_{}$}#}%B#}%

  --> PPP negotiation detected.

  --> Starting pppd at Tue Dec 15 11:19:14 2009

  --> Pid of pppd: 6666

  --> Using interface ppp0

  --> Authentication (CHAP) started

  --> Authentication (CHAP) successful

  --> local IP address 10.24.229.233

  --> remote IP address 192.168.254.254

  --> primary DNS address 211.137.160.5

  --> secondary DNS address 211.136.17.107

  --> Script /etc/ppp/ip-up run successful

  --> Default route Ok.

  --> Nameserver (DNS) Ok.

  --> Connected... Press Ctrl-C to disconnect

  4. 断开以太网连接:

  sudo ifconfig eth0 down

  sudo route add default gw 10.24.229.233 ##这里是ppp0的IP

  5. 测试网络:

  ping 60.28.166.84

  ping www.chinaunix.net

  如果ping不通域名,可以cat /etc/resolv.conf

  然后写入拨号获得的DNS

最新游戏更多

最新软件更多

  • 玩家推荐
  • 游戏攻略

金钼软件下载站 Copyright(C) 2008- 601958.cn All Rights Reserved!

闽ICP备2023004188号| 免责声明