CentOS Linux解决Device eth0 does not seem to be present
时间:2024-04-02 05:10:51 点击:372
在vmware里克隆出来的centos Linux。。

ifconfig...没有看到eth0.。然后重启网卡又报下面错误。

故障现象:

service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]

CentOS Linux解决Device eth0 does not seem to be present

解决办法:

首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:

# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM==“net“, ACTION==“add“, DRIVERS==“?*“, ATTR{address}==“00:0c:29:8f:89:9
7“, ATTR{type}==“1“, KERNEL==“eth*“, NAME=“eth0“
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM==“net“, ACTION==“add“, DRIVERS==“?*“, ATTR{address}==“00:0c:29:50:bd:1
7“, ATTR{type}==“1“, KERNEL==“eth*“, NAME=“eth1“

记录下,eth1网卡的mac地址00:0c:29:50:bd:17

接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0

# vi /etc/sysconfig/network-scripts/ifcfg-eth0

将 DEVICE=“eth0“ 改成 DEVICE=“eth1“ ,
将 HWADDR=“00:0c:29:8f:89:97“ 改成上面的mac地址 HWADDR=“00:0c:29:50:bd:17“

最后,重启网络

# service network restart
或者

# /etc/init.d/network restart

正常了。

最新游戏更多

最新软件更多

  • 玩家推荐
  • 游戏攻略

金钼软件下载站 Copyright(C) 2008- 601958.cn All Rights Reserved!

闽ICP备2023004188号| 免责声明